1.5L Mineral Water Bottle High Speed PET Blow Moulding Machine
Performance and Advantages
1 . The circulating chilling water system as well as the fan with converter controlled can protect the bottle neck against
deformation when the preform is being heated.
2 . The homothermal heater adopts auto reflection and closed loop adjusting system which have the power supplied constantly
in proportion, not affected by the fluctuation of voltage. The conveying chain is short pitched and paratactic, which helps to
realize slow heating and low power consumption. As a result, the preform can be heated evenly and easy to blow.
3 .The positioned installation of molds makes it possible to change molds easily within one hour,the operator only need to stand
on the ground can finish this job, no need to stand on the machine frame,the safety for person is much higher.
4 . All the critical parts we use for the machines, such as the electrical, pneumatic components, servo motor, etc, are famous
branded parts imported from Japan, USA and Europe,which ensures the stability and long life of our equipments.
5 .The high pressure blowing valve is equipped with the device of converting to low pressure air, which can ensure the normal
conversion without low pressure air. Machine is equipped with the high pressure air recovery device, in the process of bottle
blowing production, the high pressure air can be recoveried and used for the cylinders/ pre-blow.
Technical Parameter
| Items |
Unit |
Model |
| RiBo-10CR48-1.5L |
| Molding Spec. |
Preform Pitch |
mm |
96 |
| Preform Heating Pitch |
mm |
48 |
| No.of Cav. |
cav. |
10 |
| Container Spec. |
Max.Container Volume |
L |
1.5 |
| Neck Diameter Range |
mm |
38 |
| Max.Preform height |
mm |
150 |
| Max.Preform diameter |
mm |
37.5 |
| Max.Containr Diameter |
mm |
90 |
| Max.Containr Height |
mm |
320 |
| ※※Theoretical Output |
bph |
20000~12000 |
| Power Spec. |
Rated Power |
KW |
158 |
| Power Consumption |
KW |
52~72 |
| Compressor Spec. |
Blowing Pressure |
Mpa |
2.8~3.2 |
| Air Consuming |
m3/min |
12 |
| Main Machine Spec. |
Size |
mm |
9039*3558*3350 |
| Weight |
Kg |
10500 |
| Note: Due to continuous technical development specification would be improved without prior notice. |
| Special designs correspond to customers needs. |
Product Tags:
|
|
1.5L PET Blow Moulding Machine Images
|
